UV-C 185nm and 254nm Lamps - 5V DC & 12V DC Inverters - High and Low Voltage Wires
|
|
Please note that we are only shipping in continental US and Canada via USPS.
Please do not make any other international purchases, your order will be refunded.
|
General Information about UV-lamps
|
The Ultraviolet light is classified in three ranges of wavelength:
UV-A from 315nm to 400nm
UV-B from 280nm to 315nm
UV-C from 100nm to 280nm
We can only offer UV-A 360nm, UV-C 185nm and 254nm lamp. Customized products have a minimum order of 100pcs and 4-6 weeks lead time. Contact us your requested dimensions for a quotation
|
| UV-C Cold Cathode 254nm Lamps |
Quartz Lamps are low pressure lamps that generate most of the energy at 254nm (253,7nm - Mercury line) and some energy at 185nm. In medical terminology they are known as UV-C lamps.
UV-C lamps are manufactured with quartz glass, and have traces of Mercury (less than 3mg per lamp). These lamps generate UV radiation at 254nm. There is also a small amount of Ozone generated by the residual radiation of 185nm and corona effect for all UV 254nm lamps.
Our 12V DC Inverters are designed to supply the lamp with the correct voltage.
|
CAUTION !!!
SAFETY CONCERNS:
• Although the amount of UV and Ozone generation is very small, we recommend all suitable precaution to avoid eyes or skin exposure to UV radiation. It can produce serious damage to the eye, which may lead to temporary or permanent vision impairment. For this reason, the light produced by a germicidal lamp must be carefully shielded against both direct viewing and reflections and dispersed light that might be viewed.
• Do not touch the glass/quartz with the bare hands. Rubber gloves are recommended.
• Use appropriate protection, wires and insulated materials to avoid surge voltage from the lamp leads. Do not touch plug with wet hands.
• Discard the lamps in accordance with safety code requirements for materials containing Mercury.
• When Lamp in use we recommend an adequate ventilation.
• Take also all suitable requirements recommended by the government safety code to avoid a prolong inhalation of Ozone generated by lamp.
• The operation risk is in Group 1 per ANSI / ESNA PR27.3-96.
• This lamp should not be used for cosmetic treatments, therapeutic or diagnostic purpose.
• This product is not a toy. Use and store out of reach of children
• Intended for indoor use only. Do not use the ballast in wet or dump conditions.
• Do not expose/use lamp, ballast and wires in excessive heat, moisture, humidity, condensation, and other weather elements.
• Only our lamps with water protected sleeve can be inserted in water up to the black flange.
|
| UV Lamps currently in Stock |
|
|
 |
MCCUV-CW-50x8x50 185nm (generates ozone)
185nm lamp, 50mmx8mmx50mm, 4mm dia. attached high voltage wire and connector
Click here for lamp specifications
$19.98 (pack of 2)
|
|
|
 |
185nm Ushape 150mm Lamp (generates ozone)
185nm Lamp U-Shape 150x10x150mm w/harness & connector
Click here for lamp specifications
SOLD OUT
|
|
|
|
MCCUV-50/5 254nm
254nm lamp, 50mm length by 5mm dia.
Click here for complete specifications
|
|
 |
254nm 100x12mm Lamp, 12V DC Single Inverter, Low voltage wire
1pcs 254nm Lamp 100mm length x 12mm dia. with attached wires
1pcs 12V DC Single Lamp Inverter
1pcs Low Voltage Wire 150mm length
Click here for specifications
$20.19 (only 1 left in stock)
|
|
 |
254nm 100x12mm Lamp, 12V DC Dual Inverter, low voltage wire
2pcs 254nm Lamp 100mm length x 12mm dia. with attached wires
1pcs 12V DC Dual Lamp Inverter
1pcs Low Voltage Wire 150mm length
Click here for specifications
$28.49 (only 2 left in stock)
|
|
|
 |
MCCUV-CV-50x8x50 254nm
254nm lamp, 50mmx8mmx50mm, 4mm dia. with Quartz Sleeve and attached High Voltage wire & Connector
Click here for complete specifications
$14.49
|
|
|
|
|
MCCUV-CW-50x8x50 254nm
254nm lamp, 50mmx8mmx50mm, 4mm dia. with High Voltage wire & Connector
Click here for complete specifications
$19.98 (pack of 2)
|
|
|
|
MCCUV-C-75x8x75 254nm
2pcs UV-C Lamp 254nm, 75mmx8mmx75mm, 4mm dia.
Click here for complete specifications
CUSTOMIZED ORDERS ONLY MIN 100pcs
contact us for details |
|
 |
MCCUV-CV-100x8x100 254nm
254nm lamp, 100mmx8mmx100mm, 4mm dia. with Quartz Sleeve and attached High Voltage wire & Connector
Click here for complete specifications
$14.89
|
|
|
|
|
MCCUV-CW-100x8x100 254nm
254nm lamp, 100mmx8mmx100mm with attached High Voltage wire & Connector
Click here for complete specifications
$19.98 (pack of 2)
|
|
|
MCCUV-150x10x150
254nm U-Shape 150x10x150mm lamp with 300mm wire & connector
Click here for complete specifications
$21.00 (pack of 2)
|
|
|
5V DC and 12V DC Single and Dual Inverters - High and Low Voltage Wires with connector |
. |
High voltage wire with Connector Part No. HV275
High voltage wire min. 225mm long, it connects the inverter to the lamp
(click picture to enlarge)
$1.49
|
|
 |
Low voltage wire with Connector Part No. LV150
Low voltage wire min. 150mm long, it connects the inverter to you power source
(click picture to enlarge)
$1.49
|
|
 |
5V Dual Lamp Inverter, Part No. INV-2L-5V-200
(for use only with straight 50mm lamps and U-shape 50mm lamps)
The inverter is designed to supply the Cold Cathode Lamp with correct voltage for lamps up to 200mm length. First, it will supply a starting voltage up to 700-750 vrms. Then the voltage will drop supplying the lamp a constant current of 4-6 mA at 40-50 KHz. To power the lamp we highly recommend our invertors designed for each type of lamp length.
Click for complete specifications
$6.99
|
|
 |
12V Single Lamp Inverter, Part No. INV-1L-12V-300
The inverter is designed to supply the Cold Cathode Lamp with correct voltage for lamps up to 300mm length. First, it will supply a starting voltage up to 900-950 vrms. Then the voltage will drop supplying the lamp a constant current of 4-6 mA at 40-50 KHz. To power the lamp we highly recommend our invertors designed for each type of lamp length.
Click for complete specifications
$6.29
|
|
|
12V Dual Lamp Inverter, Part No. INV-2L-12V-300
The inverter is designed to supply the Cold Cathode Lamp with correct voltage for lamps up to 250mm total length. First, it will supply a starting voltage up to 900-950 vrms. Then the voltage will drop supplying the lamp a constant current of 4-6 mA at 40-50 KHz. To power the lamp we highly recommend our invertors designed for each type of lamp length.
Click for complete specifications
$6.99
SOLD OUT
|
|
|
12V Dual Lamp Inverter, Part No. INV-2L-12V-300N
(Designed for the U-shape 50mm, 75mm and 100mm lamps)
The inverter is designed to supply the Cold Cathode Lamp with correct voltage for lamps up to 250mm total length. First, it will supply a starting voltage up to 900-950 vrms. Then the voltage will drop supplying the lamp a constant current of 4-6 mA at 40-50 KHz. To power the lamp we highly recommend our invertors designed for each type of lamp length.
Click for complete specifications
$6.99
|
|
|
|
|
